SSimder Heavy Duty 800A Electrode Holder& Ground Clamp Pack
Impuesto incluido.
Los gastos de envío se calculan en la pantalla de pago.
An 800A heavy-duty stick lead set that replaces the three parts that fail first on any stick welder — holder, ground clamp, and cables — complete and ready to weld out of the box.
One kit covers the whole stick circuit: an 800A electrode holder, a ground clamp, and two 10 ft 25 mm² copper leads, plus a DKJ 35-50 to 10-25 adapter so it plugs into both large and small Dinse sockets. No wire-up, no guessing — swap it on and strike an arc.
At a Glance
Every number below matches the product listing — the same figures we publish on Amazon.
| Type | Electrode holder & ground clamp set (stick / MMA / ARC) |
|---|---|
| Rating | 800 A |
| Cable | 25 mm² flexible copper · 10 ft (3 m) each lead, holder + ground |
| Connector | DKJ 35-50 · 10-25 adapter included for smaller sockets |
| Rods | All standard stick electrodes — E6011 / E6013 / E7018 |
| In the box | 800A holder ×1 · ground clamp ×1 · adapter ×1 |
Built for
- ✓Replacing worn factory leads — jaw-worn holders and loose clamps are the first thing to go on any stick machine.
- ✓Long welds without heat creep — 800A headroom over 140–250A machine output keeps the handle comfortable.
- ✓Fence, trailer & farm repairs — 10 ft leads on both sides give you room to move around the work.
- ✓Any brand machine — works on any stick/ARC welder with a 35-50 or 10-25 socket.
Not built for
- ✕MIG / TIG torch connection — this is a stick (MMA) accessory only.
- ✕Machines without a stick mode — it needs an ARC/MMA output socket to plug into.
How It Compares
Three ways to buy a stick lead set. Here is what the extra dollars buy.
| This 800A set | Holder-only stingers cables not included |
Generic no-name sets | |
|---|---|---|---|
| Rating | 800A | 500–600A | Unrated |
| Complete circuit | ✓ Holder + clamp + 2 leads | ✕ Holder only | varies |
| Cable | ✓ 25 mm² · 10 ft ×2 | ✕ None | Thin stock cable |
| Adapter | ✓ 35-50 + 10-25 | ✕ | ✕ |
| Rods | E6011 / 6013 / 7018 | All standard | varies |
| Best for | One-box replacement | Spare stinger | Light occasional use |
Full Specifications
| Type | Stick / MMA lead set |
|---|---|
| Rating | 800 A |
| Holder lead | 10 ft (3 m) · 25 mm² copper |
| Ground lead | 10 ft (3 m) · 25 mm² copper |
| Connector | DKJ 35-50 · 10-25 adapter included |
| Rods | E6011 / E6013 / E7018 & standard stick electrodes |
| Pieces | 3 (holder, clamp, adapter) |
What’s in the Box
One carton, the complete stick circuit — nothing else to order before your next weld.
- 01800A stick electrode holder with 10 ft lead
- 02Ground clamp with 10 ft lead
- 03DKJ 35-50 to 10-25 adapter
FAQS
Will it fit my welder?
If your machine runs stick or arc, yes. There is no connector to match, because this holder wires directly to your existing lead.
Is the cable and ground clamp included?
Yes. This is the complete set: an 800A electrode holder and a ground clamp, each with its own 10 ft 25 mm² lead, ready to weld out of the box.
Does it get hot on long welds?
The 800A rating sits well above what most home machines output. Combined with the insulated handle, that headroom is why it stays comfortable.
Will it work with 6011, 6013, and 7018?
Yes. All standard stick electrodes fit the jaw.
