SSimder MIG-140 Pro 5 in 1 Pulse MIG Welder
Imposte incluse.
Spese di spedizione calcolate al check-out.
A 140A 5-in-1 Pulse MIG welder that weighs 9.8 lb yet takes a full 10 lb wire spool — gas MIG, flux core, Lift TIG, stick, plus Pulse and SPOT modes.
The MIG-140 Pro is the portable one-machine shop: weld with gas at the bench, switch to gasless flux core outdoors, then finish thick stock in Stick. Pulse tames thin metal; the SPOT timer tacks panels without burn-through. It runs on 110V or 220V and welds steel and stainless — it is not rated for aluminum.
Five Modes. One 9.8 lb Machine.
Gas or gasless, bench or backyard — switch modes in seconds on the same 140A power source.
Gas MIG
140A · Solid Wire
Solid steel wire with shielding gas lays clean, low-spatter beads on mild steel — the light-duty workhorse for the home shop.
Flux Core
Gas-Free · Plug and Weld
Self-shielded flux core runs on standard 110V household power — weld fences, brackets, and auto body right out of the box.
Lift TIG
DC · Precision Beads
Lift-arc TIG (WP-17V torch, sold separately) gives a steady, controllable puddle for precise beads on steel and stainless.
Stick (MMA)
Hot Start · Easy Arc
Forgiving arc characteristics make stick welding approachable — great for outdoor repairs and thicker stock.
Pulse + SPOT
Pulse Control · Spot Tack
Pulse mode lowers heat on thin sheet to cut burn-through, and SPOT tack-welds sheet metal in a timed burst.
At a Glance
Every number below comes from the official spec sheet — the same figures we publish on Amazon.
| Processes | 5-in-1: Gas MIG, Flux Core, Lift TIG, Stick — plus Pulse & SPOT modes |
|---|---|
| Max output | 140A |
| Voltage | Dual 110V / 220V |
| Aluminum | No — DC machine for steel & stainless (see FAQ) |
| MIG wire | Solid & flux core · 0.8 / 1.0 mm · spool 0.5–10 lb |
| Controls | Pulse (Flux Core / Lift TIG / Stick), SPOT timer 0.3–5.0s, Synergic MIG, 2T/4T |
| Included | MIG torch, 0.5 lb flux wire, 0.5 lb solid wire, stick holder, ground clamp |
Built for
- ✓Auto body & thin sheet — Pulse plus the SPOT timer keep heat down and stop burn-through.
- ✓Mobile repair — 9.8 lb one-hand carry, runs on whatever outlet the job has.
- ✓Beginners — Synergic MIG auto-matches wire feed to voltage while you learn.
- ✓Small shop — gas and gasless MIG in one box, plus Lift TIG and Stick backup.
Not built for
- ✕Aluminum, any thickness — not rated for aluminum welding. For aluminum choose the SD-4050 Pro (Pulse MIG, no spool gun needed).
- ✕HF TIG precision start — this is a Lift TIG machine; the WP17V torch is sold separately.
How It Compares
Compact welders look alike on paper. Here is what the MIG-140 Pro adds for the money.
| MIG-140 Pro | Typical compact 3-in-1 |
SD-4050 Pro 10-in-1 flagship |
|
|---|---|---|---|
| Processes | 5-in-1 | 3-in-1 | 10-in-1 |
| Pulse mode | ✓ Flux / TIG / Stick | ✕ | ✓ |
| SPOT timer | ✓ 0.3–5.0s | ✕ | ✓ |
| Max wire spool | 10 lb | 2 lb | 10 lb |
| Machine weight | 9.8 lb | 12–15 lb | 41.9 lb |
| Aluminum | ✕ | ✕ | ✓ Pulse MIG |
Full Specifications
| Model | MIG-140 Pro |
|---|---|
| Input voltage | 110V / 220V dual |
| Max output | 140A |
| MIG modes | Gas MIG (solid wire) · Flux Core (gasless) |
| Pulse | Flux Core, Lift TIG, Stick |
| SPOT timer | MIG mode · 0.3–5.0 s |
| Wire | Solid & flux core · 0.8 / 1.0 mm · 0.5–10 lb spool |
| Optional | WP17V TIG torch (sold separately) |
| Machine weight | 9.8 lb / 4.43 kg · 12 × 5.9 × 10.2 in |
| Boxed | 17.31 lb · 14.96 × 10.6 × 12.4 in |
What's in the Box
Wire included on both sides — flux core and solid — so you can weld the day it arrives.
- 01MIG welding torch
- 020.5 lb flux core wire spool
- 030.5 lb solid wire spool
- 04Stick electrode holder
- 05Ground clamp
- 06Gas tube
- 07220V conversion cord (US / CA)
- 08Operation manual & quick-start card
Genuine SSimder Parts
Know Your Torches — and Their Kits
The 15AK MIG gun ships in the box. The Lift TIG mode runs an optional WP17V torch, sold separately — add it below and keep every torch’s wear parts stocked.
15AK MIG Welding Consumables — 24Pcs
Shop the Kit →
WP17V TIG Torch Kit
Add the Torch →
All kits are genuine SSimder parts matched to this machine’s torches. Not sure which one you need? A photo of your torch tip is all it takes — service@ssimder.com.
Frequently Asked Questions
Can it weld aluminum?
No. The MIG-140 Pro is a DC machine built for mild steel, carbon steel, stainless steel, cast iron, and titanium. For aluminum welding, step up to the SD-4050 Pro , which welds aluminum with Pulse MIG — no spool gun needed.
Can it weld with gas AND without gas?
Yes. Connect shielding gas and use the included solid wire for clean gas MIG, or load flux core wire for gasless welding outdoors or in the wind. One machine covers both workflows.
Is Pulse available in every mode?
No. Pulse activates on flux core MIG, Lift TIG, and Stick. It does not apply to gas MIG — use standard MIG settings there for the cleanest gas welds.
Does it come with a TIG torch?
No — the WP17V (or WP26V) TIG torch is sold separately. The machine ships with the MIG torch and all accessories listed under What's in the Box.
How often do I need to change the wire spool?
The MIG-140 Pro accepts both 2 lb and 10 lb spools. With a standard 2 lb spool on a typical portable welder, you might reload every 1–2 projects. With a 10 lb spool, most home users go 4–8 weeks between spool changes.
Is it good for complete beginners?
Yes — it was designed with first-time welders in mind: Synergic MIG mode automatically matches wire feed speed to your voltage, the SPOT timer gives precise short bursts for tack welds, and Pulse mode delivers controlled heat.
What's included in the box?
MIG welding torch, 0.5 lb flux core wire, 0.5 lb solid wire, electrode holder, ground clamp, gas tube, 220V conversion cord (US/CA), and operation manual.
How portable is it really?
The bare machine weighs 9.8 lb (4.43 kg) and measures 12 × 5.9 × 10.2 in — it fits in a trunk and carries in one hand. The full box (with torch, wire, and cords) is 17.31 lb.
